May 2021 FAQ: How to Receive a Test or Qualification Quote from Integra
How to Receive a Test or Qualification Quote from Integra
Take a look at some of our most frequently asked questions:
- What information customer needs to provide to get a Test quote?
-
Datasheet or similar document that shows how the device performs electrically
-
Referenced customer specs for the device or testing
-
If datasheet does not have Physical Outline Drawing (POD); it needs to be provided
-
Any specific test plan we need to follow. The more parameters we test; the most expensive the test cost becomes
-
For ASICs and FPGAs; will the customer provide any patterns?
-
ESD classification of the device
-
MSL classification of the device for the purposes of post electrical test packing
-
Any SOW that defines the flow that we need to follow
-
Qty to be tested
-
Temperatures at which the testing will be performed
-
Any add-on marking required to be put on
-
How to handle the rejects (we ship them or we scrap them)
-
Will the customer be able to provide NRE samples for set-up? Integra requires a minimum of 7 devices.
-
Technical contact for any questions
-
Required schedule
-
- What information customer needs to provide to get a Qualification quote?
-
-
If the device needs to be tested before, during and after qualification testing; please provide the above test information
-
Any SOW that defines the flow that we need to follow and any special set-up requirements (example: ramp rate during temperature cycle)
-
Referenced customer specs for the device or qualification
-
What are the tests that need to be performed and what test methods to use (JEDEC, Military standard, AEC etc.)?
-
Qty per test
-
Will the customer be able to provide NRE samples for set-up? Integra requires a minimum of 7 devices.
-
Will DPA or failure analysis be needed? Please provide details of required DPA and failure analysis
-
Technical contact for any questions
-
Required schedule
-