Take a look at some of our most frequently asked questions:
Datasheet or similar document that shows how the device performs electrically
Referenced customer specs for the device or testing
If datasheet does not have Physical Outline Drawing (POD); it needs to be provided
Any specific test plan we need to follow. The more parameters we test; the most expensive the test cost becomes
For ASICs and FPGAs; will the customer provide any patterns?
ESD classification of the device
MSL classification of the device for the purposes of post electrical test packing
Any SOW that defines the flow that we need to follow
Qty to be tested
Temperatures at which the testing will be performed
Any add-on marking required to be put on
How to handle the rejects (we ship them or we scrap them)
Will the customer be able to provide NRE samples for set-up? Integra requires a minimum of 7 devices.
Technical contact for any questions
Required schedule
If the device needs to be tested before, during and after qualification testing; please provide the above test information
Any SOW that defines the flow that we need to follow and any special set-up requirements (example: ramp rate during temperature cycle)
Referenced customer specs for the device or qualification
What are the tests that need to be performed and what test methods to use (JEDEC, Military standard, AEC etc.)?
Qty per test
Will the customer be able to provide NRE samples for set-up? Integra requires a minimum of 7 devices.
Will DPA or failure analysis be needed? Please provide details of required DPA and failure analysis
Technical contact for any questions
Required schedule